Engineering Specifications

Approved List of Manufacturers

Contact the Engineering Department at 352-394-7177 with questions regarding approved manufacturers.  If you would like  to request consideration for a product please use the Approved Product List Submission form listed below. 

The purpose of the Digital Data Submission Standard is to set a basic CAD and GIS standard to ensure consistent electronic deliverables. It is our goal to use CAD and GIS to improve the efficiency of permitting, GIS data entry, and asset management processes. Please be advised that the information outlined in the Digital Data Submission Standard will be required with all electronic as-builts submitted to the City of Clermont. Incomplete as-built submittals will be rejected by the City resulting in the delay of a certificate of occupancy for projects. The Digital Data Submission file is available by clicking on the above link.

Standard Details

The City of Clermont's General Notes sheets and applicable standard details must be included on all projects within the City limits and/or using the City's utilities.

  • General Notes Sheet GN1 and GN2 (available for download in the Engineering Specification Documents section)
  • Standard Details Sheets D1 to D5 (available for download in the Engineering Specification Documents section)
    • Standard Details Sheet D1
      • Street Sign Detail
      • Silt Barrier Detail
      • Dumpster Detail
      • Outfall Structure Detail
      • Sidewalk and Driveway Detail
      • Generator Slab Detail
    • Standard Details Sheet D2
      • Standard Manhole Detail
      • Manhole Connection Details
      • Standard Manhole Frame and Cover
      • Service Connection for Deep Sewer
      • Type A Bedding and Trenching Detail
      • Type B Bedding and Trenching Detail
      • Cleanout Detail in Paved Areas
    • Standard Sewer Details Sheet D3
      • Piping Clearances
      • Sewer Service Riser Connection Details
    • Standard Water/Sewer Details Sheet D4
      • Megalug Details
      • Thrust Restraint Details
      • Pavement Crossing Detail
    • Standards Water/Sewer Details Sheet D5
      • Type A Bedding and Trenching Detail
      • Type B Bedding and Trenching Detail
      • PVC Pipe Locating Wire Detail
      • Air or Combination Air/Vacuum Release Valve Detail
      • Tapping Sleeve Detail (Elevation View)
      • Tapping Sleeve Detail (Plan View)
      • Pipe Detector Wire Marker Tape Installation
  • Standard Water Details Sheet D6 to D12 (available for download in the Engineering Specification Documents section)
    • Standard Water Details Sheet D6
      • Blowoff Valve Detail
      • Reduced Pressure Backflow Preventer
      • Temporary Jumper Connection Detail
      • Water Service Connection Details
      • Fire Hydrant Detail
    • Standard Water Details Sheet D7
      • Fire Line Master Meter Assembly
    • Standard Lift Station Details Sheet D8
      • Electrical Schematic
    • Standard Lift Station Details Sheet D9
      • Electrical Notes
      • Structural Notes
      • Telemetry Assembly
    • Standard Lift Station Details Sheet D10
      • Telemetry Wiring
    • Standard Lift Station Details Sheet D11
      • Telemetry Wiring
      • RTU Tower
    • Standard Lift Station Details Sheet D12
      • Control Panel Detail
      • Valve Box Cover Detail
      • Lift Station Site Plan
  • Standard Lift Station Detail Sheets D13 to D16 (available for download in the Engineering Specification Documents section)
    • Standard Lift Station Details Sheet D13
      • Duplex Pump Station Details
    • Standard Lift Station Details Sheet D14
      • Triplex Pump Station Details
    • Standard Chain Link Fence Details Sheet D15
    • Standard Chain Link Fence Details Sheet D16
  • City of Clermont Title Block

City of Clermont General Notes and Standard Details were last updated May 10, 2023.

ENGINEERING SPECIFICATION DOCUMENTS